Mercedes-Benz GLK-Class: Breaking-in notes
The first 1000 miles (1500 km)
The more you look after the engine when it is new, the more satisfied you will be with its performance in the future.
- Drive at varying vehicle speeds and engine speeds for the first 1000 miles (1500 km) for this reason.
- Avoid overstraining the vehicle during this period, e.g. driving at full throttle.
- Change gear in good time, at the latest when the tachometer needle is 2/3 of the way to the red area in the tachometer display.
- Do not manually shift to a lower gear to brake the vehicle.
- If possible, do not depress the accelerator pedal past the point of resistance (kickdown).
- Only select shift ranges 3, 2 or 1 when driving slowly, e.g. in mountainous terrain.
- If possible, drive in drive program E for the first 1000 miles (1500 km).
After 1000 miles (1500 km), you can increase the engine speed gradually and bring the vehicle up to full speed.
You should also observe these notes on running in if the engine or parts of
the drive train on your vehicle have been replaced.
Always observe the respective speed restrictions.
See also:
Multi-information display
The following information is included on the multi-information display: warnings,
odometer/tripmeter, service reminders, engine coolant temperature, fuel remaining,
outside temperature, 4WD operation status, average and momentary fuel consumption ...
Control panel buttons — color screen with navigation
system (if so equipped)
Control panel buttons — color screen with navigation
system (if so equipped)
1. (brightness control) button
2. Display screen
3. MAP button*
4. NAV button*
5. TRAF button*
6. SETUP button
7. BACK button
8. TUNE/SCROLL knob
9. ...